CALL TIME
The total time of the previous call and last call is displayed by selecting "Call time".
CALL SERVICES
Absence Handling
The reason for being absent and the return time or date can be specified here.
1. Select "Call services".
2. Select "Absence".
3. Select the applicable absence reason in the list. The number of absence reasons (for
example “Lunch”, “Meeting”, “Trip” etc.) in the list are configured in the WinPDM.
4. Press "Select".
5. Enter time or date.
6. Press "OK"
The handset sends an absence reason code
1
to the system by establishing a call. The call will
automatically be disconnected after a few seconds.
Deactivate the Absence Setting
1. Enter “Call service” in the menu.
2. Select “Deactivate”.
3. Press "Select".
Divert Calls
The user can divert calls to another extension by selecting "Divert calls".
Divert Internal/External Calls
1. Select "Internal" and/or "External".
2. Select "Activate".
3. Enter number (maximum 24 digits) to divert to, or press to access the phonebook.
4. Press "OK".
Note: These functions are system dependent. In addition to the default Call services
functions, up to 10 additional system specific call services can be defined, with or without
automatic disconnection. The parameters are set up in the WinPDM, refer to the
Configuration Manual for the handset, and the Installation and Operational Manual for
the Portable Device Manager (WinPDM), Windows version; see Related Documents on
page 74.
1. The code is defined when configuring the absence/diversion reason in the WinPDM/Device Manager.
To Next Page
Loading...
