Mitel 5613 - The DECT Handset

Mitel 5613 DECT Phone User Manual for MiVB
6
*System dependent feature
THE DECT HANDSET
IMPORTANT: The handset may retain small magnetic objects around the mouthcap or
earcap region.
Case
The plastic cover parts are made of durable PC/ABS material.
Antenna
The antenna is integrated inside the handset.
Loudspeaker
The handset has a separate loudspeaker for the loudspeaking function. It is placed on the back
side of the handset.
Microphone
The microphone is placed on the front bottom side of the handset.
Clip
There are two different belt clip options to the handset; a hinge-type clip (standard) or a
swivel-type clip. See Attach the Hinge-type Clip on page 69, or Attach the Swivel-type Clip on
page 69. Use the clip to attach the handset to a belt or similar. The handset can also be used
without a clip.
Battery
The battery is a rechargeable Li-Lon battery, placed under a battery cover. See Replace the
Battery on page 68.
The battery is fully charged within four hours. See Charge the Battery on page 68.
11 Four-way navigation key
Navigation key with Left, Right, Up, and Down.
During a call, the keys Up and Down are used to increase and decrease the speaker
volume, respectively.
12 Display
The color display is a 1.77 inch TFT with backlighting.
13 Headset connector
The headset connector is for connecting a headset. The connector is protected against
dust by using the headset connector cover.