2. Select "Answer Call waiting".
3. Press "Select". The new call is now connected, and the first call is on hold.
When the line is free, the call on hold will automatically be dialed again. This is a system
dependent feature.
Method 2
If a second caller calls during a phone call, the handset will beep and display the text "Internal
call" for internal callers and "External call" for external callers. The handset will also show the
name or phone number of the second caller. To answer the second caller:
1. Press the soft key "Accept".
The text "Switch" briefly appears on screen, and the handset transfers to the second call.
The first call is put on hold.
2. When finished speaking with the first caller, select the "More" soft key.
3. Select "End Call".
The second call is closed and the first call is retrieved.
DTMF
Some systems/PBXs require that the handset sends Dual Tone Multi Frequency (DTMF) when
pressing the keys. DTMF can be enabled as follows:
1. Press the "More" soft key during the call.
2. Select "DTMF".
3. Press "Select". This will enable the use of DTMF signals.
DECT INFO
This option is only visible if the Admin menu is activated. For more information, refer to the
Configuration Manual for the handset; see Related Documents on page 74.
LOUDSPEAKING FUNCTION
How to activate the loudspeaking function is dependent of the choice of answering method. An
incoming call can be connected with loudspeaking function active by pressing left soft key.
During a call, a press on the left soft key activates the loudspeaking function. Press the left soft
key again to turn it off.
CALL DIVERSION
All calls; internal calls, external calls, calls when busy, or calls at no answer can be diverted to
another handset number. The diversion is made via the Calls menu > Call services > Divert
calls. See Divert Calls.
Note: A second call can be rejected by pressing the "Decline" soft key. The second
caller will hear an engaged tone, and the call will be logged as a missed call in the
handset.
To Next Page
Loading...
