Mitel 5613 - Managing Active Calls

Mitel 5613 DECT Phone User Manual for MiVB
28
DURING A CALL
If the handset is configured via WinPDM/Device Manager, a predefined emergency number
can be called while the handset or keypad is locked. When calling from a locked handset, only
the Microphone on/off function can be accessed by pressing the soft key "More". However, the
entire In Call menu is accessible when calling from a handset with locked keypad.
ADJUST THE VOLUME DURING A CALL
On the navigation key, press up and down to increase and decrease the volume, respectively.
The handset will now store and keep the new volume level.
OPEN CONTACTS DURING THE CALL
1. Press the “More” Soft key during the call.
2. Select “Contacts”.
3. Press “Select”.
4. Select “Call contact” for searching a local or company phonebook contact, or select “Central
phonebook” for searching a central phonebook contact.
5. Press “Select”.
6. Select or search contact.
TURN THE MICROPHONE ON/OFF DURING A CALL
1. Press the “More” Soft key during the call
2. Select “Microphone off”
3. Press “Select”.
The icon indicates a silenced microphone. This means that the other part in an ongoing
call cannot hear you. To turn the microphone back on, do as follows:
1. Press the “More” Soft key during the call.
2. Select “Microphone on”.
3. Press “Select”.
The microphone can be turned on and off by long pressing .
START A NEW CALL DURING CONVERSATION
1. Press the “More” Soft key during the call.
2. Select “New Call”
1
.
Note: Some of these functions are system dependent. The parameters are set up in the
Portable Device Manager (WinPDM/Device Manager), refer to the Configuration Manual
for the handset, and the Installation and Operational Manual for the Portable Device
Manager (WinPDM), Windows version (see Related Documents on page 74).
Note: The selected contact can be called by pressing "Call". When calling the contact,
the first call is put on hold. See also Start a New Call during Conversation.
1. Visible if defined in the WinPDM.