Mitel 5613 DECT Phone User Manual for MiVB
SWITCH THE HANDSET ON/OFF
The handset is switched off:
1. Press and hold On-hook key .
2. When pressing the On-hook key, the handset will vibrate and the display lights up.
3. A dialog window “Switch on?” is displayed. Confirm by pressing “Yes”.
The handset is in idle mode:
1. Press and hold On-hook key .
2. A dialog window “Switch off?” is displayed. Confirm by pressing “Yes”.
TURN THE AUDIBLE SIGNAL ON/OFF
A long press on in idle mode, changes between ring signal on/off.
The icon indicates a silenced handset.
LOCK AND UNLOCK THE KEYPAD
IN IDLE MODE
To prevent accidentally pressing keys and making a call, the keys can be locked.
Lock Keypad
Press and then “Lock”.
Unlock Keypad
Press and then “Yes”.
DURING A CALL
To prevent accidentally pressing keys, the keys can be locked during a call. This can be useful
when a headset is used and the handset is attached to a pocket or belt.
Lock keypad
1. Long press .
2. Press “Lock”.
Unlock keypad
1. Press .
Note: An incoming call can be answered or ended while the keypad is locked. If
configured in the WinPDM, an emergency call can also be made while the keypad is
locked. Refer to the Configuration Manual for the handset; see Related Documents on
page 74.
To Next Page
Loading...
