Mitel 5613 - Page 65

57
more information. If the handset shall subscribe additional system, it must also be added
manually.
The IPEI code is a unique code which has been assigned to the handset, see also Admin Menu
on page 59.
1. Select "System".
2. Select "Subscribe".
3. Enter System name (optional). If no system name is entered, the default name will be used.
That is System A, System B etc. depending on which system name that is free.
4. Press "next".
5. Enter PARK code (max. 31 digits). The PARK code may not be needed if there is no alien
DECT system within the coverage area.Enter AC code. Press "Next".
An information text "Protection on?" is displayed.
6. Select "Yes" if the new system needs to be protected. A protected subscription cannot be
deleted from the System menu
1
.
7. Press "OK". A searching mode starts.
Unsubscribe System
1. Select "Unsubscribe".
2. Select the system to unsubscribe in the list.
3. Press "Select".
4. Press "Yes" to unsubscribe the system. Otherwise, press "No".
Rename System
The system name in the handset can be renamed:
1. Select "Rename System".
2. Select system to rename.
3. Press "Edit"
4. Enter new name.
5. Select "Save".
Note: The PARK code may not be needed if there is no alien DECT system within the
coverage area.
1. A protected system cannot be unsubscribed via the System menu. The unsubscribtion must be made via the Admin menu or
the DECT system.