Mitel 6900 User Manual

Name: Mitel 6900
Brand: Mitel
Rating: 5 (1 reviews)

79 pages

To Next Page

INSTALLATION INSTRUCTIONS

Mitel 6900, 6970, 6800, and 6700

SIP Terminals for MiVoice MX-ONE

Peter PetterssonppetterssonMSEArne Mileramiler

1 General3
- 1.1 Scope3
- 1.2 Glossary3
- 1.3 Environmental Requirements3
2 Cabling4
3 Power Equipment4
4 Earthing and Grounding5
5 Setting up the Software Server6
6 Manage the Configuration Files in MX-ONE Service Node Manager7
- 6.1 Create a Configuration File7
- 6.2 EDITING an Existing Configuration File8
- 6.3 Scratch Pad when Creating the Configuration file8
- 6.4 Connect Existing Configuration File to MX-ONE Service Node Manager9
- 6.5 Retrieve the Back-up Copy9
7 How to Start a New Phone10
- 7.1 Boot flow chart11
- 7.2 Connecting the Phone to a Network12
- 7.3 SIP Registration12
- 7.4 Message Waiting Indicator15
8 Managing IP Phone SW16
- 8.1 Phone software and configuration files on the software server16
- 8.2 Installing the Firmware / Configuration files17
- 8.3 Firmware upgrade17
- 8.4 Viewing Software Version18
9 Restart / Restore19
- 9.1 Restart19
- 9.2 Remove local configuration settings19
- 9.3 Restore to Factory Default19
10 Entering Administrator Mode21
11 Configuring the Phone22
- 11.1 Settings mode22
- 11.2 Settings in the configuration file aastra.cfg/startup.cfg22
- 11.3 Automatic LAN Access Control, IEEE802.1x23
- 11.4 LLDP-MED24
- 11.5 Enabling / Disabling DHCP25
- 11.6 Setting the Phone's IP Address25
- 11.7 Setting the IP Address to the Default Gateway25
- 11.8 Setting the IP Address and Download Protocol of the Software Server25
- 11.9 Setting the IP Address of the SIP proxy / registrar26
- 11.10 Using Virtual LAN (VLAN)26
- 11.11 Setting Time and Date26
- 11.12 Configuring Language Settings27
- 11.13 Using Shortcut Keys27
  - 11.13.1 Key numbering27
  - 11.13.2 Default key layout29
  - 11.13.3 Flexible IP Function keys in MX-ONE Provisioning Manager37
  - 11.13.4 Assigning Phone Numbers to Speed dial keys41
  - 11.13.5 Assigning MNS Keys41
  - 11.13.6 Shared Call Appearance (SCA)42
  - 11.13.7 Extra Directory Number (EDN)42
  - 11.13.8 Softkeys for busy services43
  - 11.13.9 Key Lock / Unlock43
  - 11.13.10 Conference key43
  - 11.13.11 Assigning DMN keys43
- 11.14 Initiating Data from MX-ONE Provisioning Manager44
- 11.15 Dial Plan45
- 11.16 Authentication code shall not be visible46
- 11.17 Free on Second Line46
- 11.18 Diversion / Call Forward46
  - 11.18.1 Initiate the Divert Settings From MX-ONE Provisioning Manager47
- 11.19 Do Not Disturb (DND)47
- 11.20 Configuring Ring Signals49
- 11.21 Configuring Presence Services49
- 11.22 Using DNS SRV Resource Records49
- 11.23 Using the Phone as an Operator Media Device (OMD)51
- 11.24 Central Storage of User Specific Data51
- 11.25 Configuring the Diffserv Parameter51
- 11.26 Selection of Transport Addresses (Port Numbers)51
- 11.27 Registration Distribution52
- 11.28 Redundancy52
  - 11.28.1 Limitations53
- 11.29 Registration at Branch Offices53
- 11.30 Voice Mail53
- 11.31 Corporate Directory53
  - 11.31.1 Mitel CMG directory54
- 11.32 Call Park Pool54
- 11.33 Intercom54
- 11.34 IP Phone Administration54
12 Passwords and PIN Codes56
- 12.1 Changing the Administrator Password56
- 12.2 Web Interface Passwords for End Users56
13 Headset57
- 13.1 6900 Family57
- 13.2 6800 Family57
- 13.3 6700 Family57
14 Expansion Modules58
15 Emergency Calls59
16 VoIP Recording60
- 16.1 Configuration at Total Recording60
- 16.2 Configuration at Recording on Demand61
17 Quality of Service (QoS)62
18 DHCP server63
- 18.1 Data from DHCP63
- 18.2 DHCP Settings for Option 6663
- 18.3 DHCP Settings for Option 43 and 6063
19 Security69
- 19.1 Encrypted Configuration Files69
- 19.2 TLS69
- 19.3 SRTP69
- 19.4 How to enable security on Mitel 6900, 6970, 6800 and 6700 terminals and on MiVoice MX-ONE70
- 19.5 How to enable security for home worker on Mitel 6700, 6800 and 690072
20 Troubleshooting75
- 20.1 Capture logfiles via SYSLOG75
- 20.2 Issues with DHCP Options76
21 Appendix77
- 21.1 Teleworker with persistent mutual TLS (MTLS)77
  - 21.1.1 Create persistent MTLS using a Enterprise CA (openssl) to sign both server and client certificate and configure the SBC77
  - 21.1.2 Configure the phones to use persistent MTLS78

Questions and Answers:

Need help?

Do you have a question about the Mitel 6900 and is the answer not in the manual?

Mitel 6900 Specifications

General

Bluetooth	No
USB	Yes
Operating System	Linux
Power	Power over Ethernet (PoE) or AC adapter
Touchscreen	Yes
Supported Codecs	G.711, G.722, G.729, iLBC, Opus
Power over Ethernet	Yes, IEEE 802.3af
Supported Protocols	SIP
USB Ports	1x USB 2.0 host port

Related product manuals

Mitel 6900 Series

12 pages

Mitel MiVoice 6900 Series

Mitel 6900 User Manual

Table of Contents

Questions and Answers:

Mitel 6900 Specifications

Related product manuals