Mitel 6900 - SOFTKEYS FOR BUSY SERVICES; ASSIGNING DMN KEYS

MITEL 6900, 6970, 6800, AND 6700 SIP TERMINALS FOR MIVOICE MX-ONE
43 26/1531-ANF 901 14 Uen S 2019-10-18
the Line1 except for busy; when there is a call on an EDN line, the line is regarded as
busy. When there is a call on Line1 it is still possible to receive another call on Line2.
The EDN keys are initiated with MX-ONE Provisioning Manager (or via the MX-ONE
command interface). No settings in the aastra.cfg/startup.cfg file are needed.
For more information how to initiate the softkeys as EDN keys, see 11.13 Using
Shortcut Keys on page 27.
11.13.8 SOFTKEYS FOR BUSY SERVICES
To get the softkeys for busy services to show up on the first page, one parameter in the
aastra.cfg/startup.cfg file has to be enabled:
! collapsed context user softkey screen:1
The following is valid for 6735/55, 6867/6869/6873 and 6737/57: The busy services
call-back and call pickup are shown on softkeys on page 1 when calling a busy exten-
sion. Call waiting and intrusion are shown on softkeys on page 2, which means that the
user has to press More to see these softkeys.
The following is valid for 6739: All busy services are shown on the first page.
See also section 11.2 Settings in the configuration file aastra.cfg/startup.cfg on page
22.
11.13.9 KEY LOCK / UNLOCK
It is possible to lock or unlock softkeys, programmable keys and expansion keys. When
key locking is enabled, the phone uses the settings from the configuration files and
ignores any previous local configuration. A user cannot override the configuration of a
locked key. Example:
#Save
prgkey5 locked: 1
#Delete
prgkey6 locked:1
When viewing the locked key via the Mitel Web UI, the key is grayed out (disabled) and
cannot be changed.
It is also possible to lock parameters in the configuration files, by starting the line with
an exclamation mark (!). Example:
! collapsed context user softkey screen:1
11.13.10 CONFERENCE KEY
The hardkey for conference in 6867, 6869, 6873, 6730/31/39 is defined in the
aastra.cfg/startup.cfg template file, and of course when using MX-ONE Service Node
Manager to create the configuration file, to send a DTMF digit to the exchange. The
possibility to initiate a three part conference locally in the phone is disabled.
The conference softkey sends an xml request to the exchange to initiate a conference.
11.13.11 ASSIGNING DMN KEYS
The shortcut keys can be configured as Diversion MoNitoring (DMN) keys. This key will
monitor calls that are diverted or deflected from the extension on which the key is