26/1531-ANF 901 14 Uen S 2019-10-18 64
DHCP
SERVER
After option 60 has been entered into the DHCP server, the data in option 43 has to be
entered. The following options exist:
Table 8 Options that can be set in option 43.
For an example how to configure option 60 and 43 in a Linux environment, see the
Administrator Guides for Mitel SIP Phones.
Below is an example showing how to configure DHCP in a Windows environment.
18.3.1 DEFINE VENDOR CLASS
Select Define Vendor Class in the drop down list.
6940 MitelIPPhone6940i
6863 AastraIPPhone6863i
6865 AastraIPPhone6865i
6867 AastraIPPhone6867i
6869 AastraIPPhone6869i
6873 AastraIPPhone6873i
6730 AastraIPPhone6730i
6731 AastraIPPhone6731i
6735 AastraIPPhone6735i
6737 AastraIPPhone6737i
6739 AastraIPPhone6739i
6753 AastraIPPhone53i
6755 AastraIPPhone55i
6757 AastraIPPhone57i
Code Description
02 Configuration server (protocol, server and path).
Syntax: string
03 RCS. Not used in a MX-ONE environment
08 Header to activate the VLAN transfer to the phone.
Syntax: 16 bytes character string “Aastra(space)Telecom(space)(space)” i. e.
4161737472612054656c65636f6d2020
09 VLAN identity (1-4094)
Syntax: 4 bytes whereas the first and second byte must be 0x00 and third and
fourth byte the VLAN id. Example: 100 in decimal is 00 00 00 64 in hex.
Model Identifier Value
To Next Page
Loading...
