Mitel 6900 - SETTING THE IP ADDRESS OF THE SIP PROXY; REGISTRAR; USING VIRTUAL LAN (VLAN)

26/1531-ANF 901 14 Uen S 2019-10-18 26
C
ONFIGURING THE PHONE
• Manually via the administrator web UI: Click on Advanced Settings > Configu-
ration Server
• Automatically using DHCP, see 18.1 Data from DHCP on page 63.
11.9 SETTING THE IP ADDRESS OF THE SIP PROXY / REGIS-
TRAR
The phone is configured with the IP address of the SIP proxy using one of the following
methods:
1. In the configuration file aastra.cfg/startup.cfg in the parameter: sip proxy ip.
The necessary settings in the configuration file for this are created automatically
when using MX-ONE Service Node Manager.
2. In the configuration file <mac>.cfg in the parameter: sip proxy ip.
3. Phone UI: Options > Admin Menu > [6739i; select Advanced] > SIP Settings
> Proxy IP/Port
4. Web UI: Click on Advanced Settings > Global SIP > Basic SIP > Basic SIP
Network Settings
11.10 USING VIRTUAL LAN (VLAN)
The following VLAN data can be set:
• Enable VLAN tagging
• VLAN identity
The following configuration alternatives are available:
• aastra.cfg/startup.cfg file.
• Link Layer Discovery Protocol for Media Endpoint Devices (LLDP-MED).
• In DHCP option 43, see section 18.3 DHCP Settings for Option 43 and 60 on
page 63.
• Phone UI. Options > Admin Menu > [6739i; select Advanced] > Network
Settings > Ethernet & VLAN - VLAN Settings
• Web UI: Click on Advanced Settings > Network > VLAN
For detailed configuration information, see Administrator Guides for Mitel Models 6900,
6970, 6800, 6700 and 9000 Series IP SIP Phones
11.11 SETTING TIME AND DATE
Time and date are set via the NTP protocol from a time server.
The time and data format is also possible to change.
The following configuration alternatives are available:
• aastra.cfg/startup.cfg file.
• Phone UI. Options > Preferences > Time and Date
• Web UI: Click on Preferences > Time and Date Settings