26/1531-ANF 901 14 Uen S 2019-10-18 56
P
ASSWORDS AND PIN CODES
12 PASSWORDS AND PIN CODES
The following passwords or PIN codes are used when working with these phones:
• PIN code for registering the phones to MX-ONE. The user can change the PIN
code with the procedure: *74*old PIN*new PIN#
It is recommended to use PIN code to avoid that an end-user can log on with
another end-user’s directory number.
• Administrator password for accessing the phone using the phones' web interface
or the phone menus.
• User password for accessing the phone using the phone's web interface or
phone menus.
12.1 CHANGING THE ADMINISTRATOR PASSWORD
The administrator password can be changed from the aastra.cfg/startup.cfg file, see
Administrator Guide for Mitel Models 6900, 6970, 6800, 6700 and 9000 Series IP SIP
Phones. The password can only consist of digits
The user name is: admin
The default password is 22222.
12.2 WEB INTERFACE PASSWORDS FOR END USERS
End users can use a Web browser to access the phone's Web interface. This interface
can be used when working with contacts and other user specific data.
The user name is: user
There is no password by default.
The user password can be initiated/changed via the phone UI:
Options > Option List > User Password
The user password can also be changed via the web UI.
Click on: Operations > User Password
To Next Page
Loading...
