26/1531-ANF 901 14 Uen S 2019-10-18 10
H
OW TO START A NEW PHONE
7 HOW TO START A NEW PHONE
The phone is delivered with default settings for an IP network. These settings must be
adapted to the local network using phone configuration files.
If MX-ONE Service Node Manager is used, the phone configuration files are generated
and stored on the Software Web Server.
If MX-ONE Service Node Manager is not used, a software server must be set up
supporting any of the protocols HTTP or HTTPS to host the phone firmware, language
files and configuration files. The firmware files can be downloaded from Service
Support Plaza. There are phone configuration template files adapted for MX-ONE
stored under: etc/opt/eri_sn/aastraSIPPhone.
Configuration and FW files are described in section 8 Managing IP Phone SW on page
16.
When the phone is powered up, it will look for software (firmware) and configuration
files on the software server according to its configuration server settings, see
section11.8 Setting the IP Address and Download Protocol of the Software Server on
page 25.
To Next Page
Loading...
