MITEL 6900, 6970, 6800, AND 6700 SIP TERMINALS FOR MIVOICE MX-ONE
15 26/1531-ANF 901 14 Uen S 2019-10-18
With logon at startup disabled, SIP registrar must be set in the <mac> file to trigger the
phone to register. (aastra.cfg/startup.cfg setting is 0.0.0.0):
sip proxy ip: <mx-one ip address/host>
sip registrar ip: <mx-one ip address/host>
Change and write protect the logon/logoff key as described earlier.
7.3.6 CHANGE OF PIN CODE
The user can change the PIN code by entering the procedure *74*old PIN*new PIN#.
Note: If a <mac>.cfg file is used, the PIN code must manually be changed also in this
file.
7.4 MESSAGE WAITING INDICATOR
The red lamp in the upper right corner is called message waiting indicator and is used
in the following cases:
• message waiting indication: blinking slow
• incoming call: blinking fast
• no service: lit.
The Message Waiting key (or on Mitel 6739 a hardkey with a letter symbol) is used to
fetch a message indicated by the red lamp blinking slow and on some models a letter
icon on the idle screen. Once the message is fetched the red lamp will be turned off.
To Next Page
Loading...
