26/1531-ANF 901 14 Uen S 2019-10-18 74
S
ECURITY
https client method:"TLS 1.0"
https user certificates:CA.pem #root CA
sips persistent tls:1
sip outbound support: 1
sip transport protocol: 4 #1-UDP,2=TCP,4=TLS
sips trusted certificates: CA.pem #root CA
sip outbound proxy:193.10.10.10
sip outbound proxy port:5061
sip srtp mode: 2 #0-RTP,2-SRTP only
The proxy and registrar is set via /Startup or /Logon, which will be the MX-ONE
server receiving the XML Request according to the SBC Relay setting for port
22223. However, if extension_registration_distribution is active the proxy, regis-
trar will be set according to the extension’s Home Location Register (HLR) (see
the lim setting in command extension -p)
sip proxy ip: 0.0.0.0
sip proxy port: 0
sip registrar ip: 0.0.0.0
sip registrar port: 0
time server disabled:0 #0-NTP enabled
#skip the server setting below if DHCP Options 42 is used
time server1:<NTP server>
Make sure the NTP server is accessible from the home network. You may use a
server from http://www.pool.ntp.org/en/, as for example 0.se.pool.ntp.org
To Next Page
Loading...
