Mitsubishi Electric MELSEC iQ-R Series - Batch Read (Command: 0601)

10 BUFFER MEMORY ACCESS
10.2 Intelligent Function Module
163
10
Batch read (command: 0601)
Read the data from the buffer memory of an intelligent function module.
Message format
The following shows the message format of the request data and response data of the command.
■Request data
■Response data
The value read from the buffer memory is stored.
Page 162 Read data, write data
Data specified by request data
■Command
■Subcommand
■Start address
Specify the buffer memory start address to be read. (Page 160 Start address)
■Number of bytes
Specify the number of bytes of the buffer memory to be read. (Page 161 Number of bytes)
Specification range: 2H to 780H (1920)
■Module number
Specify the intelligent function module to be read. (Page 161 Module number)
Specify the access range within the range of buffer memory.
ASCII code Binary code
ASCII code Binary code
Command Subcommand Start address
Number of
bytes
Module No.
0
30H
6
36H
0
30H
1
31H
01 H 06 H
0
30H
0
30H
0
30H
0
30H
00 H 00 H