Mitsubishi Electric MELSEC iQ-R Series - Turn COM.ERR. LED off (Command: 1617)

11 CONTROL MODULE OPERATION
11.5 Clear Error Information
189
11
Turn COM.ERR. LED OFF (command: 1617)
Turn the COM.ERR.LED of Ethernet interface module OFF.
The commands can be used for E71 connected to an external device and cannot be used via network.
Message format
The following shows the message format of the request data and response data of the command.
■Request data
■Response data
There is no response data for this command.
Data specified by request data
■Command
■Subcommand
Communication example
Turn COM.ERR.LED OFF.
■Data communication in ASCII code
(Request data)
■Data communication in binary code
(Request data)
ASCII code Binary code
ASCII code Binary code
Command Subcommand
1
31H
6
36H
1
31H
7
37H
17 H 16 H
0
30H
0
30H
0
30H
0
30H
00 H 00 H
31 H 36 H 33 H 31 H 30 H 30 H 30 H 30 H
00007161
Subcommand
17H 16H 00H 00H
Subcommand