Mitsubishi Electric MELSEC iQ-R Series - Copy File (Command: 1824)

226
12 FILE CONTROL
12.5 File Creation and Deletion
Copy file (command: 1824)
Copy a file.
When this command is executed to files of parameter and a program being executed, place CPU module in
the STOP status. (Page 463 Commands that cannot be executed during RUN)
Message format
The following shows the message format of the request data and response data of the command.
■Request data
■Response data
There is no response data for this command.
Data specified by request data
■Command
■Sub command
■Fixed value
Specify '0'.
ASCII code Binary code
Item ASCII code Binary code
For MELSEC-Q series
For MELSEC-L series
For MELSEC iQ-R series
ASCII code Binary code
Password Drive No.
Number of file
name characters
File nameCommand Subcommand
Fixed
values
Copy destination
Password Drive No.
Number of file
name characters
File name
Copy source
1
31H
8
38H
2
32H
4
34H
24 H 18 H
0
30H
0
30H
0
30H
0
30H
00 H 00 H
0
30H
0
30H
0
30H
4
34H
04 H 00 H
0
30H
0
30H
4
34H
0
30H
40 H 00 H
30H 30H 30H 30H
30H
(16 characters)
00H 00H 00H 00H 00H
(8 bytes)