Mitsubishi Electric MELSEC iQ-R Series - Model Name and Model Code

168
11 CONTROL MODULE OPERATION
11.1 Data to be specified in commands
Model name and model code
The model name and model code of the access target module.
Model name
The character string of a model name is stored in 16-digit ASCII code.
If the read model name is less than 16 characters, a space (20H) is stored for the shortage of the characters.
The model name is stored in ASCII code while communicating in binary code.
Ex.
For Q02HCPU
Model code
The model code of the module is stored.
■Data communication in ASCII code
Convert the numerical value to 4-digit ASCII code (hexadecimal), and send it from the upper digits.
■Data communication in binary code
Send 2-byte numerical values from lower byte (L: bits 0 to 7).
Ex.
For Q02HCPU (41H)
Model name and model code list
The following shows the list of model names and model codes.
■MELSEC iQ-R series
ASCII code, binary code
ASCII code Binary code
Model name Model code
RCPU 0360H
R04CPU 4800H
R04ENCPU 4805H
R08CPU 4801H
R08ENCPU 4806H
R08PCPU 4841H
R08SFCPU 4891H
R16CPU 4802H
R16ENCPU 4807H
R16PCPU 4842H
R16SFCPU 4892H
R32CPU 4803H
R32ENCPU 4808H
R32PCPU 4843H
R32SFCPU 4893H
R120CPU 4804H
R120ENCPU 4809H
20 H 20 H 20 H 20 H 20 H 20 H 20 H 20 H
Q02
51 H 30 H 32 H
H
48 H
CPU
43 H 50 H 55 H 20 H
0
30H
0
30H
4
34H
1
31H
41 H 00 H