Mitsubishi Electric MELSEC iQ-R Series - Details of Setting Data; Station no

50
6 ACCESS ROUTE SETTINGS
6.2 Details of Setting Data
6.2 Details of Setting Data
This section explains the content and specification method of the data items to set the access route.
: Necessary, : Unnecessary
Station No.
Specify the station accessed from an external device.
Accessing the connected station (host station)
Specify '0' when accessing the connected station (host station).
Accessing multidrop connection station
Specify the station No. of an access target station from '0' to '31' (00H to 1FH) when connecting with the multidrop connection.
■When accessing all stations connected with the multidrop connection with the global function
Specify 'FF' (FFH) when turning ON/OFF the global signal to all station connected with the multidrop connection using the
global function. By specifying 0 to 31 (00H to 1FH), X1A/X1B turns ON only on the specified station, and does not turn ON on
the other stations.
(Page 255 Global Function)
Item Frames for C24 Frames for E71 Reference
4C 3C 2C 1C 4E 3E 1E
Station No.    Page 50 Station No.
Network No.    Page 52 Network No., PC No.
PC No.   
Request destination module I/O No.    Page 55 Request destination module I/O No., request
destination module station No.
Request destination module station No.
Self-station No.    Page 59 Self-station No.
External device
Connected station
(Host station)
:Access target station
External device
Multidrop connection
:Access target station
External device
Multidrop connection
:Access target station