Mitsubishi Electric MELSEC iQ-R Series - Frame

46
6 ACCESS ROUTE SETTINGS
6.1 Accessible Ranges and Setting Data for Each Frame
3C frame
Accessible range of 3C frame
The following ranges can be accessed.
Message format (Setting example for accessing connected station (host station))
Setting data
Set the following items.
2C frame
Accessible range of 2C frame
The following ranges can be accessed.
Message format (Setting example for accessing connected station (host station))
Setting data
Set the following items.
Item Description Reference
Station No. Specify the station to be connected from an external device. Page 50 Station No.
Network No. Specify the network No. of an access target. Page 52 Network No., PC No.
PC No. Specify the network module station No. of an access target.
Self-station No. At the time of m:n multidrop connection, specify the station No. of a request source external
device.
Page 59 Self-station No.
Item Description Reference
Station No. Specify the station to be connected from an external device. Page 50 Station No.
Self-station No. At the time of m:n multidrop connection, specify the station No. of a request source external
device.
Page 59 Self-station No.
External device
Multidrop connection
Network
No.1
Network
No.n
(Relay station)
Connected station
(Host station)
:Accessible target station
30H 30H
00
30H 30H
00
46H 46H
FF
30H 30H
00
Network No.
Station No. PC No.
Self-station No.
External device
Multidrop connection
Connected station
(Host station)
:Accessible target station
30H 30H
00
30H 30H
00
Station No. Self-station No.