Mitsubishi Electric MELSEC iQ-R Series - Page 224

222
12 FILE CONTROL
12.5 File Creation and Deletion
Communication example (files for MELSEC iQ-R series)
Create a new file in the following conditions:
• Drive No.: 4
• File size: 7168 byte
• File name: LINE.CSV (8 characters)
The value of the file name is as follows:
(1) LINE.CSV (8 characters)
■Data communication in ASCII code
(Request data)
In the figure (1), set the value of "ASCII code" in the table of "Value of code corresponds to character" in "File name".
■Data communication in binary code
(Request data)
In the figure (1), set the value of "Binary code" in the table of "Value of code corresponds to character" in "File name".
Item Value of code corresponds to character
File name L I N E . C S V
UTF-16 004C 0049 004E 0045 002E 0043 0053 0056
ASCII code 30303443 30303439 30303445 30303435 30303245 30303433 30303533 30303536
Binary code 4C00 4900 4E00 4500 2E00 4300 5300 5600
1820
31 H 38 H 32 H 30 H
0040
30 H 30 H 34 H 30 H 30 H 30 H 30 H 30 H
0004
30 H 30 H 30 H 34 H
00001C0000
30 H 30 H 30 H 30 H
00
31 H 43 H 30 H 30 H
0008
30 H 30 H 30 H 38 H
(1)
Number of file name
charactersSubcommand (Fixed value) Drive No. File size File name
20 H 18 H 40 H 00 H 00 H 00 H 00 H 00 H 00 H 1C H 00 H 00 H 04 H 00 H 08 H 00 H
(1)
Drive
No.
Number of file name
charactersSubcommand File size File name