Mitsubishi Electric MELSEC iQ-R Series - Page 336

334
15 QnACPU DEDICATED COMMANDS
15.3 File Control
Communication example (Batch modify file information) (subcommand: 0002)
Modify the file name of the following files, attribute, and last edit date and time.
• Drive name: 1 (RAM area of memory card A)
• File No.: 1
• File name (before modification): ABC12.QPG
• File name (after modification): ABC1234.QPG
• Attribute (before modification): 20H (disk files that can be read/written)
• Attribute (after modification): 01H (read only file)
• Modification pattern: 1FH (Specify the date and time of QnACPU to the last edit day and last edit time)
■Data communication in ASCII code
(Request data)
■Data communication in binary code
(Request data)
Subcommand Keyword Setting flag Drive name File No.
Attribute (Before modification)
File name
(Before modification)
Extension
(Before modification)
Modification pattern File name (After modification)
Attribute (After modification)
Extension
(After modification)
File size Fixed value
Last edit time Last edit date
Setting
flag
File No.
Keyword Drive name
Extension (Before modification)
Modification pattern
Attribute
(Before modification)
File name (Before modification) File name (After modification)
Extension (After modification) Last edit time
File size
Attribute
(After modification)
Fixed value
Last edit date
Subcommand