Mitsubishi Electric MELSEC iQ-R Series - Page 429

18 COMMUNICATING USING 1E FRAMES
18.5 Read and Write Extended File Register
427
18
Monitoring (command: 1B)
Monitor the extended file registers registered by monitor data registration.
■Data specified by request data
There is no request data for this command.
■Response data
Store the monitoring result.
■Communication example
Monitor the following extended file registers registered by monitor data registration.
• Monitor data registration: R15 in block number 2 and R28 in block number 3
(Response data)
(ASCII code)
(Binary code)
45 H
35 H
36 H 44 H 31 H 32 H 33 H 34 H
E56D1 2 3 4
Monitoring result
(R15 in block No.2)
(R28 in block No.3)
6DH E5H 34H 12H
Monitoring result
(R15 in block No.2) (R28 in block No.3)