Mitsubishi FX-20P-E - Page 87

FX-20P-E Handy programming panel Test 9
9-7
Example:Changing the set value from the device monitor
Changing the set value of the T5 from "K100" to "K200"
• If the set value of a timer (T) is indirectly specified through a data register, the data register
(D) No. can be changed by the operation above.
When changing the present value of a data register (D) which indicates the actual set time,
execute the present value change operation. (Refer to 9.3.)
M
In the step 1)
T 5
P
R
Display example
In the step 4)
1)
2)
3)
In the step 5)
Key operation
S'P
4)
Device monitor
of the T5
K 0
K 100
K 2 05)
GO
TT 5
P
R
K 0
K
100
Prompt
TT 5
P
R
K 0
200
K
S'P
6)
0
The step 3) displays the prompt in the present value of the T5.
The step 4) displays the prompt in the set value of the T5.
MNT/TEST