3Explanation of operation methods
Programming 3-34
◇◆◇ Select and correct the line. ◇◆◇
[ ↑ ] By the [ ↓ ] key, the cursor can be moved to Step 5, and the function key corresponding to "edit" can
also be pressed and corrected to it.
◇◆◇ Cancel correction. ◇◆◇
Correction can be canceled if the function key which corresponded for "closing" is pressed in the middle of
correction.
◆◇ Correction of the character ◇◆◇
Move the cursor to up to the mistaken character, and input the correct character after pressing the [CLEAR]
key and deleting leftward.
◇◆◇ If the program is corrected ◇◆◇
If the program is corrected, certainly save. （Function key [F4 which correspond for "closing" are pushed, or
push the [ENABLE] switch on the back of T/B, and disable T/B.） Please check that it has been correctly
corrected by step operation about the details.
To Next Page
Loading...
Need help?
General
