Mitsubishi MELFA CR1D - Version

3Explanation of operation methods
Operation of setup / initialization screen 3-82
3) Press the function key corresponding to "Close", and return to the set/initial screen.
(6) Version
Display the software version of the controller and the teaching pendant
1) Press the [4] key in the set/initial screen, and display the version screen.
2) Press the function key corresponding to "Close", and return to the set/initial screen.
<CLOCK>
DATE 08-05-07
TIME 16:35:20
CLOSE
123
<SET/INITIALIZE>
1.INITIALIZE 2.POWER
3.CLOCK 4.VERSION
CLOSE
123
<SET/INITIALIZE>
1.INITIALIZE 2.POWER
3.CLOCK
4.VERSION
CLOSE
123
<VERSION>
R/C Ver. P2T
T/B Ver. 1.2.1
CLOSE
123
<VERSION>
R/C Ver. P2T
T/B Ver. 1.2.1
CLOSE
123
<SET/INITIALIZE>
1.INITIALIZE 2.POWER
3.CLOCK
4.VERSION
CLOSE
123