3Explanation of operation methods
Operating the program control screen 3-52
3.11 Operating the program control screen
Here, explain the operation method of the following related with program management.
(1) Program list display
(2)
Copying programs (Copy)
(3) Name change of the program (Renaming).
(4) Deleting a program (Dele).
(5) Protection of the program (Protect).
(1) Program list display
This functions allows the status of the programs registered in the controller to be confirmed.
1) Select the Management/edit menu
Press the [1] key in the menu
screen. "1. Management and edit" are selected and display the list of the
programs.
Same operation can be done, even if the cursor is moved to "1. management and edit" by the [ ↑ ] or [ ↓
] key and it presses the [EXE] key.
And, the program which is the target of each operation can also be selected.
The menu ("Edit", "Position", "New", "Copy") corresponding to the function key is displayed under the
screen.
Press the [FUNCTION] key, then display the "Renaming", "Deletion", " Protection", "Close"
.
<MENU>　　 　
1.FILE/EDIT 2.RUN
3.PARAM. 4.ORIGIN/BRK
5.SET/INIT.
CLOSE
　 123
<FILE/EDIT> 1/20 Rem 136320
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08 694
A1 08-04-24 13:05:54 2208
B1 08-04-24 13:05:54 1851
COPY
123
POSI.
EDIT
NEW
⇒
To Next Page
Loading...
Need help?
General
