3-53 Operating the program control screen
3Explanation of operation methods
(2) Copying programs
1) Select the copy menu
Press the function key corresponding to the "copy" by program list display. Display the copy screen.
2) Specification and execution of the program to copy.
In the parenthesis of the copied source, the program name beforehand selected by the program list screen
is displayed. (The figure the program name "1")
If it changes, move the cursor by the arrow key.
Input the program name copied in the parenthesis of the copy destination, and press the [EXE] key.
<PROGRAM COPY>　
　 　
SRC.NAME ( 1 )
DSR.NAME ( )
CLOSE
　 123
<FILE/EDIT> 1/20 Rem 136320
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08 694
A1 08-04-24 13:05:54 2208
B1 08-04-24 13:05:54 1851
COPY
123
POSI.
EDIT
NEW
⇒
<PROGRAM COPY>　
　 　
SRC.NAME ( 1 )
DSR.NAME ( 21 )
CLOSE
　 123
<FILE/EDIT>　 　1/ 20 Rem 136320
1　　　 　 08-04-24　17:20:32　 22490
2　　　 　 08-04-24　14:56:08　 694
A1　　 　 08-04-24　13:05:54　 2208
B1　　 　 08-04-24　13:05:54 　1851
EDIT POSI.
NEW
COPY
123 ⇒
◆◇ Protected information is not copied ◇◆◇
The program protection information and variable protection information is not copied with the copy opera-
tion.
Reset this information as necessary.
To Next Page
Loading...
Need help?
General
