Moog G392-004 User Manual

MSDServoDrive AC-AC Operation Manual
moog
12
Id. no.:CA65642-001 Date:03/2012
to the glossaryto the table of contents
2.2.1 Dimensions on devices with air cooling
MSD
ServoDrive
AC-AC
Size1 Size2 Size3 Size4 Size5 Size6 Size6A
G392-004A
G392-004
G392-006
G392-008
G392- 012
G392-016
G392-020
G392-024
G392-032
G392-045
G392-060
G392-072
G392-090
G392-110
G392-143
G392-170
Weight [kg] 3.4 4.9 6.5 7.5 13 28 32
B (Width) 58.5 90 130 171 190 280
H (Height)
1)
295 345 540
T (Depth)
1)
224 240 242 322
A 29.25 50 80 120 150 200
C 344.5 365 581
C1 5 6 10
DØ 4.8 5.6 9.5
Screws 2xM4 4xM4 4xM5 4xM8
E 2 20 40
F
2)
≥100 ≥150 ≥180
G
2)
≥270 ≥300 ≥500
H1 355 382.5 600
H2 38.5 15 20
all measurements in mm
1) without terminals, plugs and plate screens
2) Possibly bigger bending radii of connecting leads must be accounted for.
Table 2.2 Dimensions of housing with air cooling, see Fig. 2.1 and Fig. 2.2
NOTE: The minimum distance “E” specified in the table for sizes 1-4 applies
for devices with the same power. When butt mounting devices with different
drive power you should arrange the devices according to their power (e.g.
viewed from the left Size4 - Size3 - Size2 - Size1). This minimizes the
thermal influence among each other.
When butt mounting MSDServoDrives together with other devices, youmust
make sure that these device do not affect one another thermally.
E
G
F
F
Fig. 2.1 Installation distances in case of air cooling, schematic representation for Size1 to Size6A

Moog G392-004 Specifications

General

Brand	Moog
Model	G392-004
Category	Servo Drives
Language	English