61 | P a g e
Hanging task light not working
Power switch in light head
not turned “ON”
Turn power switch on back of light head “ON”
Lights are too dim or bright
Adjust brightness to user preference in Light menu
on the touch screen
Check connections in hood at driver.
Check driver output.
Replace driver
Garbage Disposal/Garburator
not working
turn off facility breaker and remove jam (REF
8.2.3)
Facility breaker is tripped
Breaker on disposal itself is
tripped
Press reset button (REF 8.2.3)
Air hose disconnected from
button to air switch
Reconnect hose to both button and switch
Disposal has locked up/failed
FORMALIN
DISPENSING/TRANSFER PUMP
SYSTEM
Pump shuts off when I press the
green button
User not pressing and
holding button to transfer
formalin
Press and hold green button to transfer formalin
System/internal storage tank
is full. Pump Is automatic
turned off to prevent
overflow
Dispense formalin inside internal storage tank and
refill as needed.
Pump will not transfer any more
formalin/stops while pumping
System/internal storage tank
is full
Use formalin inside internal storage tank
Clean out salt deposits in pump.
Replace pump if damaged
Internal float switch stuck or
bad
Clean salt deposits on float switch or replace
internal float switch