Morgana Digifold Pro CB - FAULT Pump will not operate when the Compressor switch is switched on

Page87SYSTEM
DigifoldPro
FAULT:-PumpwillnotoperatewhentheCompressorswitchisswitchedon.
CheckthefuseonthePCB,inthePumpOverloadassembly.ThePumpOverloadassemblyis
locatedontheinsideoftheframe,nexttotheAnti-staticTransformer.
IfthisfusehasblownitmustbereplacedwithaT315mAfuse,Morganapartnumber681-011.
ForErrormessagesseeOperatorsManual
WHITE
ORANGE REDYELLOW
MorganaSystemsLtd
PUMPOVERLOADBOARD
WHITE
FUSE
T315mA