Performance Checks: Display Radio Test Mode (Top-Display Version) Sec 1: 5-9
NOTE: All displays are temporary and will expire without any user intervention. If
information is longer than the physical length of the radio’s display, the information
will wrap around to the next display. After the last display, “RF TEST” is displayed.
Press the Top Side Button (Purple button) to advance the test environments from
“RF TEST”, “CH TEST”, “CID TEST” then press the Top Button (Orange button) to
confirm selection. Press any other buttons to advance the test.
Once a test is carried out, restart the radio to proceed to another test.
KG6 algorithms name
(Encryption Type 6)
Type of encryption being used When the radio is secure
equipped and 6 or more
algorithms are loaded
Model number The radio’s model number, as
programmed in the codeplug
Always
Serial number The radio’s serial number, as programmed
in the codeplug
Always
ESN The radio’s unique electronic serial
number
Always
ROM Size The memory capacity of the host FLASH
part
Always
FLASHcode The FLASH codes as programmed in the
codeplug
Always
RF band 1 The radio’s operating frequency Always
Tuning Ver Version of Tuning codeplug Always
Proc Ver Version of Processor Always
Option Board
Type
Type of Option board being used When the radio has an Option
Board/ Maze with Apps
Expansion Board
Option Board
Serial Number
Serial number of the Option board is
displayed
When the radio has an Option
Board/ Maze with Apps
Expansion Board
Option Board
Bluetooth Addr
Bluetooth Address of the Option board is
displayed
When the radio has an Option
Board/Maze with Apps
Expansion Board
Option Board
SW Version
Software version of the Option Board is
displayed
When the radio has an Option
Board/ Maze with Apps
Expansion Board
Exp Board Type Type of Expansion Board is displayed When the radio has an
Expansion Board
Table 5-5. Test-Mode Displays (Continued)
Name of Display Description Appears
To Next Page
Loading...
Need help?
General
