Sec 1: 6-18 Radio Alignment Procedures: Transmitter Alignments
Figure 6-24. Transmit Deviation Balance Alignment Screen (700/800 MHz)
9. Left-click the PTT Tone: High button.
10. Adjust the softpot value until the measured deviation/voltage, when using the high tone, is
within +/- 1.5% of the value observed when using the Low Tone.
11. Left-click the PTT Toggle to de-key the radio.
12. Repeat the steps 4 to 10 for all frequencies.
13. Left-click the Program All button on the screen to dekey the radio and save the tuned values.
To Next Page
Loading...
Need help?
General
