6-12 Maintenance – EP350 (Full Keypad Model): Disassembling and Reassembling the Radio
3. Remove the Front Circuit Board from the Front Housing. (Refer Figure 6-26).
4. Remove the LCD (36) and Keypad (41) from the Front Housing. (Refer Figure 6-27).
6.5.1.4 Speaker Disassembly
1. Remove the screw holding the Speaker Retainer (10) to the Front Housing with a Phillips
screwdriver.
2. Remove the Speaker Retainer from the Housing.
3. Remove the Speaker from the Housing with a flat head screwdriver.
4. Remove the Speaker Insulator (11) from the speaker.
Figure 6-26. Front Circuit Board Removal
Figure 6-27. LCD and Keypad Removal
Note:
Be careful not to damage the Speaker Wire when removing the Retainer Bracket.
Circuit Board
Keypad
LCD