6 - 4 MC70 Integrator Guide
10. Tap Finish to complete activation. The phone can be used in approximately four hours.
Sprint Activation Test
Approximately four hours after activation is completed, test the service.
1. Tap Start > Phone.
Figure 6-6
Sprint Phone Window
2. Ensure the Sprint name displays on the window.
3. Make a voice call to ensure activation was successful.
4. Tap Start > Phone > Menu > Options > Data Settings tab > Provision to manually start an
Internet-Over-The-Air (IOTA) session for a data connection. This data connection auto-updates the Vision
profile (see Data Settings on page 6-9).
Verizon Activation
The Verizon Activation Wizard allows automatic activation. To activate the MC7095 using the automated
service, the MC7095 attempts to call the network on a special number that automatically downloads the phone
number and identification codes from the network.
Verizon automatically downloads the provisioning data. This process is invisible to the user and occurs once,
after account activation, during the first data connection attempt.
To activate the phone using the Verizon automated service:
1. Ensure the MC7095 is in a strong signal area.
2. Tap Start > Phone > Menu > Activation Wizard... .
NOTE If activation was not successful, contact the service provider.
NOTE After an MC7095 is provisioned for Verizon wireless service, it is strongly recommended that no other
service provider loads are downloaded to the MC7095 and no changes are made to any of the
provisioning information.
To Next Page
Loading...
Need help?
General
