Motorola MC70 - Chapter 1: Getting Started

Chapter 1
Getting Started
Chapter 1
Chapter 1 Getting Started
Introduction
This chapter provides information about the EDA, accessories, charging the EDA, and resetting the EDA.
Unpacking the EDA
Carefully remove all protective material from the EDA and save the shipping container for later storage and
shipping. Verify that you received the following equipment:
• MC70 EDA
• Lithium-ion battery
• Battery cover/strap assembly
• Tethered stylus
• Protective overlay, installed on display window
• Regulatory Guide
• Quick Start Guide.
Depending on the configuration ordered, the EDA package can also include:
• Standard or extra capacity battery
• AC adaptor
• Communication/charging cable
• Power supply
• US line cord
• Headset
• Single Slot USB/Serial Cradle.
Inspect the equipment. If any equipment is missing or damaged, contact the Support Center immediately. See
Service Information on page xviii for contact information.