Wireless Applications 7 - 35
Figure 7-48
System Options Dialog Box
Change Password
Use Change Password to require a password before editing a profile. This allows pre-configuring profiles and
prevents users from changing the network settings. The user can use this feature to protect settings from a
guest user. By default, the password is not set.
Figure 7-49
Change Password Window
To create a password for the first time, leave the
Current: text box empty and enter the new password in the
New: and Confirm: text boxes. Tap Save.
To change an existing password, enter the current password in the
Current: text box and enter the new
password in the
New: and Confirm: text boxes. Tap Save.
To delete the password, enter the current password in the
Current: text box and leave the New: and Confirm:
text boxes empty. Tap Save.
Table 7-26
System Options
Field Description
Profile Roaming Configures the EDA to roam to the next available WLAN profile when it moves out of
range of the current WLAN profile.
Enable IP Mgmt Enables the Wireless Companion Services to handle IP address management. The
Wireless Companion Service configures the IP based on what is configured in the
network profile. Deselect this to manually configure the IP in the standard Windows IP
window. Enabled by default.
Auto Time Config Enables automatic update of the system time. Network association updates the device
time based on the time set in the AP. This proprietary feature is only supported with
Symbol infrastructure. Enabled by default.
NOTE Passwords are case sensitive and can not exceed 160 characters.
To Next Page
Loading...
Need help?
General
