7 - 30 MC70 Integrator Guide
Wireless Diagnostics Application
The Wireless Diagnostics application window provides links to perform ICMP Ping, Trace Routing, and Known
APs. To open the
Wireless Diagnostics window, tap the Signal Strength icon > Wireless Diagnostics.
Figure 7-41
Wireless Diagnostics Window
The
Wireless Diagnostics window contains the following options. Tap the option to display the option window.
•
ICMP Ping - tests the wireless network connection.
•
Trace Route - tests a connection at the network layer between the EDA and any place on the network.
•
Known APs - displays the APs in range using the same ESSID as the EDA.
•
Quit - Exits the Wireless Diagnostics window.
Option windows contain a back button to return to the
Wireless Diagnostics window.
ICMP Ping Window
The ICMP Ping window allows testing a connection at the network layer (part of the IP protocol) between the
EDA and an AP. Ping tests only stop when you tap the
Stop Test button, close the Wireless Diagnostics
application, or if the EDA switches between infrastructure and ad-hoc modes.
To open the
ICMP Ping window, tap the ICMP Ping in the Wireless Diagnostics window.
To Next Page
Loading...
Need help?
General
