About This Guide xvii
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started provides information on EDA configurations and accessories, charging the
battery, and resetting.
•
Chapter 2, Accessories describes the accessories available for the EDA and how to set up power
connections and battery charging capabilities, where applicable.
•
Chapter 3, ActiveSync provides instructions on installing ActiveSync and setting up a partnership
between the EDA and a host computer.
•
Chapter 4, Application Deployment for Mobile 5.0 provides information for provisioning and deploying
applications to the EDA.
•
Chapter 5, MC7004/94 - GSM Configuration explains how to verify MC7004/94 service on an Enhanced
Data rates for Global Evolution (EDGE) wireless network and establish settings.
•
Chapter 6, MC7095 - CDMA Configuration explains how to configure MC7095 service on an CDMA
wireless network and establish settings.
•
Chapter 7, Wireless Applications describes how to configure the wireless LAN connection.
•
Chapter 8, Maintenance and Troubleshooting includes instructions on cleaning and storing the EDA, and
provides troubleshooting solutions for potential problems during EDA operation.
•
Appendix A, Technical Specifications includes tables listing the technical specifications for the EDA and
its accessories.
Notational Conventions
The following conventions are used in this document:
•
“EDA” refers to any Symbol terminal.
•
Italics are used to highlight the following:
• chapters and sections in this and related documents
• dialog box, window, and screen names
• drop-down list and list box names
• check box and radio button names
• icons on a screen.
•
Bold text is used to highlight the following:
• key names on a keypad
• button names on a screen.
•
Bullets (•) indicate:
• action items
• lists of alternatives
• lists of required steps that are not necessarily sequential.
To Next Page
Loading...
Need help?
General
