5 - 2 MC70 Integrator Guide
7. Configure settings (page 5-7).
8. Use the phone.
MC7004/94 Service Verification
MC7004/94 phone and data services require a live SIM card, obtained from a service provider, installed in the
EDA phone/EDA. The SIM card has embedded circuitry on one side of its surface which, when inserted into an
EDA phone, provides phone service on an EDGE network. The SIM card provides a phone number,
determines the features or services available to the subscriber, and identifies the subscriber to the network.
In addition to SIM card installation, the EDA may require various settings to operate as a phone with data
connection features.
Ensuring Network Coverage
1. Ensure an activated SIM card, from the phone service provider, is installed in the EDA.
2. Verify active phone and data services by tapping to display the Phone dialog. The network name
appears in the dialog box.
Figure 5-1
Connectivity Dialog
3. Verify SIM card functionality:
a. Tap Start > Settings > Phone icon > Network tab.
NOTE The SIM card must be GPRS enabled to connect to a GPRS network.
Service Provider
To Next Page
Loading...
Need help?
General
