Motorola MC9500-K - User Manual

Other manuals for Motorola MC9500-K

Integrator Guide188 pages

Quick Start Guide2 pages

Installation Guide2 pages

Application Guide11 pages

Questions and Answers:

T
tina18Sep 8, 2025
Why is data not transmitting correctly on my Motorola Handhelds?
- K
  kellyfisherSep 8, 2025
  If no data is transmitted or the transmitted data is incomplete during data communication on your Motorola Handhelds, it may be due to: * The MC9500-K being removed from the cradle or disconnected from the host computer during communication: Replace the MC9500-K onto the cradle, or reattach the communication cable and re-transmit. * Incorrect cable configuration. See the system administrator. * Communication software was incorrectly installed or configured. Perform setup. Chapter 2, Accessories for details.
C
Christopher NguyenAug 22, 2025
How to fix a Motorola Handhelds MC9500-K that does not turn on?
- B
  Blake ReynoldsAug 22, 2025
  If your Motorola Handhelds MC9500-K doesn't turn on, it could be due to several reasons: * The battery might not be charged: Charge or replace the battery. * The battery might not be installed correctly: Ensure it is properly installed. * A system crash might have occurred: Perform a warm boot. If it still doesn't turn on, perform a cold boot.
A
Angela MarquezSep 5, 2025
Why is my Motorola MC9500-K battery not charging?
- M
  Melissa BarajasSep 5, 2025
  If the battery of your Motorola Handhelds did not charge, it could be due to the following reasons: * The battery may have failed, in which case you should replace it. * There might be no power to the cradle or cable. Ensure that power is applied to the cradle or cable. The Battery Status LED flashes amber to indicate that the MC9500-K is charging. * The MC9500-K was removed from cradle while battery was charging. Place the MC9500-K onto the cradle. The 4800 mAh battery fully charges in less than six hours. * Extreme battery temperature: Battery does not charge if ambient temperature is below 0°C (32°F) or above 40°C (104°F). * The MC9500-K might not be functioning. In this case, perform a warm boot. If the MC9500-K still does not turn on, perform a cold boot.
F
Frederick RodriguezSep 4, 2025
How to fix no sound on Motorola Handhelds?
- T
  tbutlerSep 4, 2025
  If there is no sound on your Motorola Handhelds MC9500-K, check the volume settings. The volume may be set too low or turned off. Adjust the volume accordingly.
J
Jeanette WeeksSep 3, 2025
What to do if Motorola MC9500-K Handhelds Battery Status LED flashes but doesn't turn on?
- J
  Jon WardSep 3, 2025
  If the Battery Status LED flashes when you press the power button on your Motorola Handhelds MC9500-K, but the device doesn't turn on, the battery is likely low. Recharge the battery to resolve this.
K
katherine65Sep 1, 2025
Why won't my Motorola Handhelds camera launch?
- M
  melissabanksSep 2, 2025
  If the camera application on your Motorola Handhelds MC9500-K won't launch, it might be because the DataWedge application is running. To stop it, tap Start > Settings > System > Task Manager, select DataWedge application, and tap End Task.
A
Amber ZavalaAug 31, 2025
How to fix Motorola MC9500-K Handhelds when no data is transmitted?
- M
  Michelle SanchezAug 31, 2025
  If data isn't transmitting correctly on your Motorola Handhelds MC9500-K, ensure the device remains in the cradle or the communication cable is securely attached. Then, re-transmit the data. Other causes can be incorrect cable configuration or incorrectly installed/configured communication software.
S
Steven Wagner DDSAug 30, 2025
What to do if my Motorola Handhelds MC9500-K memory is full?
- J
  Jennifer ZamoraAug 30, 2025
  If you're getting a memory full message on your Motorola Handhelds MC9500-K, try deleting unused memos and records. If more space is needed, save records to a host computer or use a microSD card. Also, remove any unnecessary user-installed applications by going to Start > Settings > System tab, tapping the Remove Programs icon, selecting the program, and tapping Remove.
C
cberryAug 28, 2025
What to do if tapping icons doesn't work on Motorola Handhelds?
- D
  Deanna RogersAug 29, 2025
  If tapping icons or buttons on your Motorola Handhelds MC9500-K isn't working, the screen might not be calibrated correctly. To recalibrate, tap Start > Settings > System tab > Screen icon > Align Screen button. If the device is unresponsive, try a warm boot.
A
Ashley Jones DVMAug 27, 2025
What to do if my Motorola MC9500-K Handhelds battery did not charge?
- B
  Billy PaulAug 27, 2025
  If your Motorola Handhelds MC9500-K battery isn't charging, first, check if the battery has failed and replace it if needed. Also, ensure the cradle or cable is receiving power; the Battery Status LED should flash amber while charging. Make sure the device remains in the cradle for charging; a 4800 mAh battery fully charges in under six hours. Note that extreme temperatures can prevent charging, specifically below 0°C (32°F) or above 40°C (104°F). If the device is not functioning, try a warm boot, and if that doesn't work, try a cold boot.

Motorola MC9500-K Specifications

General

Operating System	Windows Mobile 6.5
Storage	1 GB Flash
Scanner	1D/2D Imager
GPS	Integrated GPS
Display	3.7 inches, 640 x 480 pixels
Processor	Marvell PXA320
Camera	3.2 MP
Battery	3600 mAh
Connectivity	Bluetooth v2.1
RAM	256 MB