2 Tighten the four M4 x 0.7 x 10 mm screws (PN: 0310909A61) to 15 in-lb (1.7 N-m) using a T20
Torx driver to secure the Modem to the repeater chassis.
Figure 65: Securing Modem to Repeater Frame
3 Secure the RX and REF cable connectors to the Modem.
Figure 66: Securing Rx and Reference Cable Connectors
4 If replacing Modem FRU from Service Kit in Service Parts on page 130, remove label PN
LB000528A01 from kit package and place onto product label on back of repeater within the hash
marks shown in Figure 67: Modem FRU Product Label on page 106.
Chapter 11: SLR 5000 Series Maintenance and Disassembly/Reassembly
Motorola Solutions Confidential
Send Feedback 105
To Next Page
Loading...
