11.6.1.9
Front Housing Installation
Procedure:
1 Line up the tabs on the Front Housing (PN: HN000198A01) to the pins on the repeater chassis
and engage them. With all three tabs engaged, rotate the Front Housing into place.
Figure 75: Securing Front Housing
2 Install the three M3 x 0.5 x 6 mm screws (PN: 0310907D02) to 10 in-lb (1.1 N-m) using a T10
Torx driver.
Chapter 11: SLR 5000 Series Maintenance and Disassembly/Reassembly
Motorola Solutions Confidential
110 Send Feedback
To Next Page
Loading...
