Motorola Mototrbo - 11.5.2.7 Modem Removal; 11.5.2.8 Power Amplifier Module Removal

Figure 53: Removing Power Supply Module from Repeater
2 Remove the Power Supply Module from the repeater.
11.5.2.7
Modem Removal
Prerequisites:
NOTICE: Ensure all connections from Power Supply to various parts of the repeater have been
detached.
Procedure:
1 Detach the two coaxial cables connecting the RX Input and Reference (REF) Input connectors
to the Modem.
2 Remove the four screws holding the Modem to the repeater chassis with a T20 Torx driver.
Figure 54: Removing Modem
3 Remove the Modem from the repeater.
11.5.2.8
Power Amplifier Module Removal
Prerequisites:
NOTICE: Ensure all connections from Power Supply to various parts of the repeater have been
detached.
Chapter 11: SLR 5000 Series Maintenance and Disassembly/Reassembly
Motorola Solutions Confidential
Send Feedback 99