Figure 58: Installing M3 Screws
2 Using a T30 Torx driver, install a M6 x1x13 mm screw with captivated external tooth
(PN: 00310909C91) to 20 in-lb (2.3 N-m).
Figure 59: Installing M6 Screw
11.6.1.2
Input Cable Installation
Procedure:
1 Insert the RX (PN: 30012083001) and Reference (PN: CB000024A01) cables into
corresponding holes in back panel.
Chapter 11: SLR 5000 Series Maintenance and Disassembly/Reassembly
Motorola Solutions Confidential
102 Send Feedback
To Next Page
Loading...
