Motorola Mototrbo - 11.6.1.10 Protective Cover Installation; 11.7 Exploded Mechanical View

Figure 76: Installing M3 Screws
11.6.1.10
Protective Cover Installation
Procedure:
Install the six M3 x 0.5 x 6 mm screws each (PN: 0310907D02) to 12 in-lb (1.3 N-m) using a T10
Torx driver to secure the bottom and top cover (PN: 07009402001) to the repeater chassis.
11.7
Exploded Mechanical View
Figure 77: SLR 5000 Series Assembly Exploded View
1
2
3
4
5
6
7
8
9
11
10
19
12
18
15
16
17
24
23
20
13
14
22
21
Chapter 11: SLR 5000 Series Maintenance and Disassembly/Reassembly
Motorola Solutions Confidential
Send Feedback 111