Motorola Mototrbo - 7.2 Back panel Interfaces; 7.2.1 AC Power Inlet

Location Connector Type Function(s)
9 BNC – Female Receiver RF (Rx)
10 BNC – Female Frequency Reference Input (REF)
11 T30 TORX Screw Bonding Ground Connection
12 N-Type – Female Transmitter RF (Tx)
7.2
Back panel Interfaces
7.2.1
AC Power Inlet
The AC power inlet connector is of the C14 type socket (IEC 60320) and accepts interface to C13 type
plugged (IEC 60320) power cords. Figure 24: AC Power Inlet Connector on page 68 shows the
location of the pins and Table 26: AC Power Inlet Connector on page 68 lists the functional
characteristics of the connector's pins.
Figure 24: AC Power Inlet Connector
1
2
3
Table 26: AC Power Inlet Connector
Location Pin Assignment Type Signal Characteristics
1 Earth
Power
100–240VAC (Line to Neutral)
4 A (max)
2 Line
3 Neutral
Figure 25: Repeater Power Switch
1
2
Table 27: Callout Legend
Label Description
1 ON (fully powered)
2 STANDBY
Chapter 7: SLR 5000 Series Back Panel
Motorola Solutions Confidential
68 Send Feedback