Motorola Mototrbo - 11.5.2.5 Front Panel Disassembly; 11.5.2.6 Power Supply Removal

Figure 51: Removing Fan
11.5.2.5
Front Panel Disassembly
Procedure:
1 Using a T10 Torx driver, remove the three screws securing the front panel to the repeater
chassis.
2 Remove the Front Panel PCB from the repeater.
Figure 52: Removing Front Panel
1
2
3
11.5.2.6
Power Supply Removal
Prerequisites:
NOTICE: Ensure all connections from Power Supply to various parts of the repeater have been
detached.
Procedure:
1 Remove the four screws securing the Power Supply Module to the repeater chassis with a T20
Torx driver.
Chapter 11: SLR 5000 Series Maintenance and Disassembly/Reassembly
Motorola Solutions Confidential
98 Send Feedback