Parameter Value or Range
Output Ripple: 30 mVp-p @ 25 °C (77 °F)
Table 18: Power Supply DC Performance Specifications
Parameter Value or Range
Input Voltage Range 11–15.5 VDC
Steady State Output Voltage Input voltage dependent (0–0.4 V below input)
Output Current (Max) 26 A
Output Ripple: 30 mV p-p, @ 25 °C (77 °F)
Table 19: Power Supply Battery Charger Performance Specifications
Parameter Value or Range
Charging Voltage Range 13.5–14.2 VDC (default 13.8 VDC: configurable)
Charging Current (Max) 3 A (in addition to output current)
NOTICE:
California Energy Commission (CEC) Compliance testing was performed with the following
recommended 12 V Lead-acid battery:
• Sprinter S12V370NGF
• GNB Industrial Power, a division of Exide Technologies, Aurora, Illinois, USA 60504
Charge time may take up to 40 hr.
5.3
Power Supply Interface
5.3.1
Power Source Inputs
Figure 19: Power Source Inputs
Chapter 5: SLR 5000 Series Power Supply
Motorola Solutions Confidential
Send Feedback 61
To Next Page
Loading...
