Motorola Mototrbo - 7.2.2 DC Power Inlet;DC Charger Outlet; 7.2.3 Option 1;GNSS; 7.2.4 Option 2;WLAN; 7.2.5 USB

7.2.2
DC Power Inlet/DC Charger Outlet
The DC power inlet/DC charger outlet connector is a Molex 42818-02012 panel mount receptacle and
accepts interface to Molex 42816-0212 plugs. Figure 26: DC Power Inlet/DC Charger Outlet Connector
on page 69 shows the location of the pins and Table 28: DC Power Inlet/DC Charger Outlet
Connector on page 69 lists the functional characteristics of the connector's pins.
Figure 26: DC Power Inlet/DC Charger Outlet Connector
1
2
Table 28: DC Power Inlet/DC Charger Outlet Connector
Location Pin Assignment Type Signal Characteristics
1 Positive
Power
11–14.4VDC
17 A (max)
2 Negative
7.2.3
Option 1/GNSS
Not supported at this time (No connection)
Figure 27: Option 1/GNSS Connector
7.2.4
Option 2/WLAN
Not supported at this time (No connection)
Figure 28: Option 2/WLAN Connector
7.2.5
USB
Not supported at this time. Type A socket (Host Connection) that supports the USB 2.1 protocol
standard. See the following figure and table for location of the pins and the functional characteristics of
the connector's pins.
Chapter 7: SLR 5000 Series Back Panel
Motorola Solutions Confidential
Send Feedback 69